
*******************************************************************
*                  ACCTON TECHNOLOGY CORPORATION                  *
*                 EN1207D-TX PCI FAST ETHERNET ADAPTER            *
*          WINDOWS 95 NDIS3 MINIPORT DRIVER INSTALLATION          *
*                                                                 *
*         Copyright (C) 1998 Accton Technology Corporation        *
*                       All Rights Reserved.                      *
*******************************************************************

The driver (ACC07D.SYS) contained in the directory WIN95 is for
the following Accton PCI Ethernet adapter:

        Accton EN1207D-TX PCI Fast Ethernet Adapter

The driver (ACC07D.SYS) conforms to the Network Driver Interface
Specification (NDIS) 3.1, and is used with Microsoft Windows 95,
Windows 95 OSR2.


  Contents:
  ---------

   (A) Installing NDIS3 Miniport driver in Microsoft Windows 95
   (B) Installing NDIS3 Miniport driver in Microsoft Windows 95 OSR2
   (C) Configuring NDIS3 Miniport driver in Microsoft Windows 95 (OSR2)


(A) Installing NDIS3 Miniport driver in Microsoft Windows 95
============================================================

    1. Plug Accton's EN1207D-TX adapter into one of the Master PCI
       slots of your PCI platform.
    2. Turn the power ON and then boot into Windows 95.
    3. Windows 95 will prompt with "PCI Ethernet Controller" in
       the "New Hardware Found" dialog box.
    4. Select "Driver from disk provided by hardware manufacturer"
       from the "New Hardware Found" dialog box, then click the OK button.
    5. Insert the Accton EN1207D-TX Driver Diskette in your floppy drive.
    6. Enter the driver pathname, i.e. A:\WIN95, then click the OK
       button in the "Install from Disk" dialog box.
    7. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
       and click the OK button in the "Insert Disk" dialog box.
    8. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
       installation files in the "Copying Files..."  dialog box,
       then click the OK button.
    9. Windows 95 will copy the driver (ACC07D.SYS) from A:\WIN95
       to C:\WINDOWS\SYSTEM directory and the ACC07D.INF file
       from A:\WIN95 to C:\WINDOWS\INF directory.
   10. Remove the Accton EN1207D-TX Driver Diskette from your floppy drive.
   11. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows 95
                O.S. is located.


(B) Installing NDIS3 Miniport driver in Microsoft Windows 95 OSR2
=================================================================

    1. Plug Accton's EN1207D-TX adapter into one of the Master PCI
       slots of your PCI platform.
    2. Turn the power ON then boot into Windows 95.
    3. Windows 95 will prompt with "PCI Ethernet Controller" in
       the "New Hardware Found" dialog box and "Update Device Driver
       Wizard" dialog box.
    4. Insert the Accton EN1207D-TX Driver Diskette in your floppy drive.
    5. Click the "Next >" button in "Update Device Driver Wizard"
       dialog box.
    6. Windows 95 will prompt with "Accton EN1207D-TX PCI Fast Ethernet 
       Adapter" in the "Update Device Driver Wizard" dialog box.
    7. Click the "Finish" button in the "Update Device Driver Wizard"
       dialog box.
    8. Enter the full pathname A:\WIN95 of the ACC07D.INF file, then
       click the OK button in the "Copying Files..." dialog box.
    9. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
       and click the OK button in the "Insert Disk" dialog box.
   10. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
       installation files in "Copying Files..." dialog box,
       and then click the OK button.
   11. Windows 95 will copy the driver (ACC07D.SYS) from A:\WIN95
       to C:\WINDOWS\SYSTEM directory and the ACC07D.INF file from
       A:\WIN95 to C:\WINDOWS\INF directory.
   12. Remove the Accton EN1207D-TX Driver Diskette from your floppy drive.
   13. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows 95 OSR2
                O.S. is located.



(C) Configuring NDIS3 Miniport driver in Microsoft Windows 95 (OSR2)
====================================================================

    1. Click the "My Computer" icon in the Main Program Group.
    2. Click the "Control Panel" icon in the My Computer window.
    3. Click the "Network" icon in the Control Panel window.
    4. Select the "Accton EN1207D-TX PCI Fast Ethernet Adapter" item
       from the "Network" dialog box, and then click the "Properties" 
       button.
    5. Click the "Advanced" button in the "Accton EN1207D-TX PCI Fast
       Ethernet Adapter Properties" dialog box.
    6. Select the Line Speed value (Auto,100full,100half,10full,10half
        from the "Value" item, and then click the OK button in the
       "Accton EN1207D-TX PCI Fast Ethernet Adapter Properties" dialog box.
    7. Click the OK button in the "Network" dialog box.
    8. Restart your computer to initialize the new configuration.




Trademarks:
Microsoft Windows 95 (OSR2) is a trademark of Microsoft Corporation.

===End of File===
